Frequently asked question

If you want speed, strength, low maintenance, and long-lasting value in a compact footprint, a pre-cast concrete plunge pool is the smartest choice.

1. Fast, predictable installation with minimal disruption

Pre-cast plunge pools are manufactured off-site to exact specs and delivered ready to set into a prepared hole. That means:

• Much shorter job timeline than a poured-in-place gunite build (days instead of weeks/months), and typically faster than depending on fiberglass lead times and custom shipping.

• Less time with heavy equipment in your yard, so less mud, less noise, and lower risk of landscaping damage.
• A factory product gives predictable quality and fewer on-site variables, so you avoid schedule slippage from weather or subcontractor delays.

2. Structural strength & durability

Pre-cast pools are made from high-density concrete cured under controlled conditions and often reinforced:

• They combine the long lifespan and robustness of concrete with the factory quality control of a molded product.
• Less risk of surface cracking or shrinkage that can happen with on-site pours if curing conditions are poor.
• Easier to insulate or encase for frost protection in colder climates.

3. Smaller footprint, bigger lifestyle value

Plunge pools are purpose-built for relaxation, cooling off, exercise (aqua-therapy or swim jets), and socializing:

• Ideal for small yards, patios, rooftops, or narrow properties where a full pool won’t fit.
• Delivers high lifestyle value per square foot, you get usable water space without sacrificing your outdoor living area.
• Easier to incorporate into a deck, hardscape, or landscape design.

4. Lower total-cost pain points (often)

While raw material costs vary, pre-cast plunge pools can beat gunite on overall cost when you factor in:

• Shorter labor time and fewer subcontractor hours.
• Lower landscaping repair costs because installation is less invasive.
• Fewer change orders and fewer on-site mistakes that blow up a budget.
  Compared to fiberglass, precast can be competitive because it avoids the shipping/handling damage risk and the expensive site prep sometimes needed for fiberglass shells.

5. Heating & energy efficiency advantages

• A smaller body of water is cheaper to heat and easier to keep at a comfortable temperature year-round.
• Concrete holds heat well, and pre-cast units can be insulated and coupled with modern heat pumps or solar systems efficiently.

6. Good for difficult sites and tight access

• If your yard has limited access, steep slopes, trees, or compacted urban lots, a pre-cast unit can be craned in and set without the need for large crews and prolonged excavation.
• This makes pre-cast pools often the best pragmatic choice for infill lots, narrow side yards, and rooftop installations (where engineered solutions allow).

7. Resale and perceived quality

• Homebuyers often view a well-installed concrete pool as durable, high-quality, and lower-risk than a damaged fiberglass shell or a poorly finished gunite job.
• Because pre-cast units are factory-controlled, you can document build quality more easily for future buyers.

Choose a pre-cast concrete plunge pool when you want a compact, durable, and design-flexible pool that minimizes site disruption and installation uncertainty. It’s a sweet spot between the custom world of gunite and the mold-based limitations of fiberglass: factory quality + concrete strength + fast install. For homeowners with smaller yards, tricky access, or a desire for fast, reliable installation and long-term value, pre-cast is often the best, most practical choice.

• Bayto Pools range in price from $33,000 – $37,000 USD.  However, the total installed project costs can vary widely depending on several factors, but on average, are between $70,000 – $80,000 USD. This price includes your Bayto pool, delivery, permitting, crane rental, and site work.
• Depending on your hardscape requirements, complexity, and scope of work, final costs can be more and vary widely based on who you choose for your installation.

• The listed price covers the pool shell, interior finish, and filtration system.
  Installation (crane, excavation, permits, and site work) is handled by you or one of our Authorized Installers.
• Find an installer near you: Bayto Installers

• Additional costs could include site and project-specific fees such as crane hire, earthworks, additional or accessory equipment, and finishings.

• Our precast concrete pools can typically be installed in 2 to 3 days, depending on site conditions and setup complexity, far faster than a traditional poured-in-place or gunite pool, which can take 6–12 weeks or more.

• Bayto Pools are shipped by third-party freight and craned into place on-site.
  We’ll provide exact lift documents and weight specifications to help coordinate with your local crane company.

• Crane costs are always site and project-specific and will need to be quoted and managed by an external crane company. The crane company will need the dimensions and weight of the pool and the location of the lifting points.  These are included in our Bayto Pools lift document.  Crane costs vary depending on the access available on site. We recommend engaging a local crane company to conduct a site visit and quote.

• YES.  Bayto Pools offers you pre-cast, prefabricated in-ground pools made entirely of concrete, which, due to their monolithic cement shell, have the particularity of being able to be above-ground, semi-inground, or fully in-ground.

• Absolutely, our pools are perfect for DIY builders! By following our installation instructions and specifications, it is simple and easy to install our pools.
• Even though DIY is possible, installing a precast concrete pool is still substantial work. We recommend the following important considerations:
• Excavation & site prep: You’ll need to dig the hole to proper dimensions, ensure proper base material, level the site, and maybe install retaining walls or soil support depending on terrain.
• Heavy lifting/crane: The precast shell will require a crane to place it safely and accurately. That means coordinating crane access, ensuring the site is reachable.
• Plumbing & electrical: Even though Bayto Pools includes some pre-plumbing, you still need to connect the filtration, pump, salt system, or whichever sanitation, lights, etc.
• Permits & inspections: Local building, electrical, plumbing, and pool safety codes must be satisfied.
• Warranty & installer vs DIY: While Bayto Pools provides a 10-year waterproof warranty on the shell, each installer is responsible for their own installation warranty while following our installation standards.

• Whether you are a landscaper, a general contractor, a pool installer, or a homeowner, we guarantee a fast, turnkey solution. Thanks to our optimized logistics and manufacturing expertise, we make installing a swimming pool a simple, accessible project without compromising on quality.
• We can connect you with one of our Bayto Pools Authorized or Certified Installers who will be able to undertake the installation and landscaping/hardscaping process.
• Find an Installer near you here: Find an Installer near you

• Our pools come with a 10-year written structural warranty, a 15-year waterproofing warranty, and separate warranties for parts and labor.

• The installation is guaranteed by the company responsible for this stage. Please refer to them for more details regarding the installation warranty.

• The installation is guaranteed by the company responsible for this stage. Please refer to them for more details regarding the installation warranty.

•  Bayto Pools manufactures pre-cast, prefabricated Monolithic concrete pools on-site at our factory in Quebec, Canada.
• Monolithic cement (or monolithic concrete) is a construction technique or form where the entire structural element is poured and cured as one continuous piece, instead of being assembled from multiple sections or layers.

Key Features

• No joints or seams → Reduces weak points and water intrusion.
• Stronger and more durable → Because it acts as one solid mass.
• Faster to construct → Single pour means fewer stages of labor.
• Better waterproofing → Especially valuable in pools.

• No.  Due to the nature of precast concrete, the top edge of your Bayto Pool is not an architectural finish.  We do deliver with a smooth edge, but there will always be slight imperfections caused by the molding process.  We recommend the use of a coping that will not only improve the look but also help protect the concrete from wear and tear. We have a Value-Added Reseller of coping accessories that can be easily added to your pool order.

• We offer three rectangular sizes (8′ x 16′, 8′ x 18′, 8′ x 20′). Our pools are also ideal for smaller areas or to allow you to keep most of your space free.
  

• As a sneak peek, we will be manufacturing an 8′ x 8′ hot tub in Q1 2026.
• Yes! For custom projects, please contact us directly, and we will be happy to personalize your project.

• On the contrary! The speed and ease of heating is actually one of the advantages of our pools, given the minimal amount of water they require.
• Concrete itself is a thermal mass, meaning it absorbs, stores, and slowly releases heat.
• Our pools retain warmth longer than fiberglass or vinyl once heated.
• Our precast (or monolithic) concrete pools are fully compatible with the following standard pool-heating systems:
  • Electric Heat Pump – Most energy-efficient for moderate climates; uses ambient air to warm water.
  • Gas Heater (natural or propane) – Fastest heating, great for spas or colder climates.

• Each pool is delivered with an interior finish in reinforced PVC membrane chosen by the customer and a complete filtration system (variable speed pump, cartridge filter, salt system, integrated LED lighting), ensuring fast and efficient installation.
  • MOOV Variable Speed Pump.  Take control of your energy consumption!  Thanks to the MOOV Al pump’s simplified interface, you can easily program the timer yourself.  You can therefore vary the power of your pump throughout the day.  Quieter than a refrigerator, it brings you the peace and quiet you deserve. Enjoy your pool in complete peace. Click here
  • The MOOV 200 Sq. Feet Cartridge Filter is a high-performance filtration system designed to provide superior water clarity for Bayto pools. With a large 200 sq. ft. filtration surface, it efficiently captures debris and particles, ensuring clean and clear water with minimal maintenance. Its user-friendly design allows for easy cartridge replacement and maintenance, making it an ideal choice for residential and small commercial pools.  Click here
  • MOOV LED pool light for pool jets, with threaded connection for 1-1/2″ jets.  Available in colors: white, white/blue, and RGB (color).  The light fixture must be installed on the pool wall or step, at least 8 inches below the water level.  We suggest that the lighting cable be installed in a conduit where the connection is in a junction box.  A certified Class 2 low-voltage transformer specific to swimming pools is required to connect this light.  Click here
  • MOOV Salt System.  Hybrid mode allows the consumer to choose the salt concentration inside the pool, ranging from 1500ppm to 5000ppm. (LS at 1,500ppm – NS at 3,200ppm)  A set of probes and sensors provides real-time data on various water parameters.  Take control of your pool remotely! The Bluetooth system allows you to control your device from a distance and access data from the last 6 months of your device.  Click here
  • Our pools are lined with RENOLIT ALKORPLAN reinforced membrane, a decorative and waterproof solution consisting of two flexible plasticized PVC sheets reinforced with polyester. This process ensures total, long-lasting, and guaranteed waterproofing, while offering exceptional mechanical resistance and perfect adaptability to the shape of the pool. Click here

• We offer a wide variety of accessories (Accessories Page)
• including:
  • 50,000 BTU Heat Pump
  • 200,000 BTU Propane/Natural Gas Heater
  • Cedar Roll Cover
  • Plug And Play Kit
  • Winter Cover
  • Automatic Cover
  • Cleaning Robot
  • Swimming System in Place
  • Pre-Cast concrete decorative panels
  • Various outdoor essentials such as pavilion and pergola kits.

• Absolutely! Our pools can be installed completely above-ground, semi-inground or inground.

• Installing a precast concrete plunge pool on different terrains requires careful planning because the pool shell is rigid and heavy. Terrain affects excavation, stability, drainage, and installation method. Here’s a detailed guide:

1. Flat, Level Ground (Ideal)
   1. Ease of installation: Easiest and fastest.

2. Slightly Sloped Terrain
   2. Ease of installation: Moderate.
   3. Challenges: Uneven ground can cause the shell to tilt or shift.
      • Excavate and create a step in the terrain or level pad for the pool base.
      • Compact the base properly to prevent settling.
      • Consider using the pool as a partial retaining wall on the downhill side to stabilize soil.

3. Steep Slopes or Hills
   3. Ease of installation: Challenging; may require professional help.
   4. Challenges: Risk of soil movement, erosion, and drainage issues.
      • Excavate and create a step in the terrain or level pad for the pool base.
      • Compact the base properly to prevent settling.
      • Consider using the pool as a partial retaining wall on the downhill side to stabilize soil.

4. High Water Table or Wet Sites
   4. Ease of installation: Difficult; professional input recommended.
   5. Challenges: Hydrostatic pressure can lift the pool shell, causing cracks or flotation.
      • Install drainage trenches or sump pumps around pool.
      • Consider a gravel bed with a drainage pipe beneath the pool to relieve water pressure.
      • Backfill carefully, possibly using concrete or sand-gravel mix.
      • Tip: Hydrostatic valves or anchors may be needed to keep the pool in place.

• All of our pools have a flat bottom at 4′-9″.

• You can use either salt (INCLUDED) or chlorine for a pre-cast concrete pool, but the choice depends on your maintenance preferences, budget, and skin/eye sensitivity. Both methods work well with our pools because the concrete shell is durable, but there are important considerations.

1. Saltwater Pools (system included)
   1. How it works: Salt is added to the water; a salt chlorine generator converts salt into chlorine automatically.
      1. Softer water for skin and eyes.
      2. Lower ongoing chemical handling — less daily dosing.
      3. Consistent chlorine levels.
      4. Salt pools generally require less daily handling, and chlorine pools require more routine dosing.
      5. Our precast concrete pools are acid-washed and coated internally with a PVC membrane, which handles saltwater well.

2. Chlorine Pools
   2. How it works: Add chlorine tablets, liquid, or granules manually or via an automatic feeder.
      2. Simple to maintain if you regularly monitor pH and chlorine.
      3. Works well in all climates.
      4. Stronger smell and harsher to skin/eyes if levels fluctuate.
      5. Concrete is naturally alkaline, so pH tends to rise; you’ll need to monitor pH and alkalinity carefully to prevent scaling or etching

• No, each pool purchased from Bayto Pools includes an owner’s manual for optimal pool maintenance.

• Each of our pools is covered with an armored PVC membrane. This coating is not only textured with relief and unique in its design, but it is also the most durable and resistant coating on the market.  This membrane is factory-installed once the customer selects from a wide variety of colors.

• Winterizing a precast concrete pool is important to prevent damage from freezing water, surface cracks, and plumbing expansion. Even though concrete is tough, water and freezing temperatures can cause serious damage if not handled correctly.
• Balance the Water Chemistry (1–2 days before closing)
  • Before you shut down the system, balance your water to prevent scaling, etching, and algae over the winter:
    • pH – 7.4 – 7.6 – Prevents scaling/etching
    • Alkalinity – 100 – 150 ppm – Buffers pH stability
    • Calcium Hardness – 200 – 400 ppm – Protects concrete from soft water
    • Chlorine – 2 – 4 ppm – Sanitizes before closing
    • Add a winterizing algaecide and shock the pool the day before you close it.

• Special Salt System Steps
  • Remove the salt cell from the plumbing line.
  • Rinse it thoroughly with fresh water (no salt or chemicals).
  • If needed, soak in a mild acid solution (1 part muriatic acid to 4 parts water) to remove scale buildup.
  • Rinse again and let it dry completely.
  • Store indoors in a warm, dry place for the winter.
  • Unplug or power off the salt system controller.
  • If outdoors, protect it from moisture with a weatherproof cover or disconnect and store it inside if possible.
• Equipment & Filter
  • Drain and clean the pump, filter, and heater.
  • Store small removable parts (o-rings, drain plugs) in a labeled bag indoors.
  • Leave valves slightly open to avoid cracking from pressure.
• Cover the Pool
  • Use a solid, mesh, or automatic winter cover tightly secured to keep out debris and sunlight.
  • Remove snow or standing water from the cover periodically.

If this is a DIY project, the following is a list of actions before receiving your pool.  If one of our installers is doing the work, they will handle this.

• Building approval/permitting is required for any pool in the United States or Canada. Check with your local permit office for your state’s regulations and requirements.
• Boundary requirements will need to be discussed with your local permit office, as this will vary depending on your site and location conditions.
• Choose a company to perform the excavation and preparation of the pool.
• Choose a crane company.
• Choose a company to perform the plumbing and electrical connection. One of our representatives will be happy to help you and direct you to one of our trusted suppliers, and provide you with our complete engineering details for a trouble-free installation.

• We’re proud to manufacture our pools entirely here in Quebec!  There are plans for a US-based manufacturing facility in 2026/2027.

• Over the past few months, we’ve received many questions regarding the new tariffs and whether they’ll impact on the pricing or supply of our pools. We’re happy to confirm: Bayto Pools is not affected by the current tariffs.  Our materials and products do not fall under the list of items targetedby the recent changes, and we continue to operate without interruption or price increases related to tariffs.

✅ No supply chain issues
✅ No price changes related to tariffs
✅ No project delays from our end

• Yes! We work in collaboration with a mortgage specialist at HFS.

• Absolutely, a visit to your home will be necessary to determine the total cost of your pool project.  Please reach out to one of our Authorized Dealers/Installers in your area to schedule your assessment and to get a proposal.  Find your Dealer/Installer here:  Find an installer near you